American Standard 2506921.002 Guía de instalación descargar pdf (Pagina 2)

Press TEE (1) onto SPOUT SHANK (2) making certain that

the O-RING (3) is properly seated on SHANK (2).

Push COUPLING (4) into TEE (1) and thread onto SPOUT

SHANK (2). Tighten using a 10mm (3/8'') hex wrench.

For ﬁtting less hand spray use COUPLING (4a).

Connect the ends of the two SUPPLY HOSES (5) to the VALVES

and TEE (1). Tighten with wrench.

Remove PLUG BUTTON (6) from rear of SPOUT (7). Loosen

SPOUT SCREW (8) with 4mm hex wrench supplied.

Install SPOUT (7) onto SPOUT SHANK (9). Align SPOUT (7).

Pushing down on SPOUT (7) tighten SET SCREW (8). Insert

PLUG BUTTON (6).

Install DIVERTER KNOB (9) onto LIFT ROD (10) in rear of

SPOUT (7). VIEW “B” Fig. 1.

Thread DIVERTER KNOB (9) clock-wise to secure it to the

LIFT ROD (10). VIEW “B” Fig. 2.

TEE AND HOSE ASSEMBLY

INSTALL TUB SPOUT

MAKE WATER SUPPLY CONNECTIONS

Connect HOT water supply to LEFT INLET UNION (11) and COLD water supply to

RIGHT INLET UNION (12). Pipe connections are 3/4" NPT. Union connections are not supplied and must be purchased separately.

Use sealant or Teﬂon tape on pipe connections.Use sealant or Teﬂon tape on pipe connections.

IMPORTAMT: Do not solder directly to valve body.

HOT

COLD

3/4" NPT

M968694 Rev.1.5

INSTALL HANDLES

TIGHTEN

FIG. 1 FIG. 2

4mm Hex

wench

(supplied)

10mm (3/8)

Hex wench

VIEW "B"

Turn VALVE STEMS (1) to the OFF position as shown in illustration.

Insert O-RINGS (4) into ESCUTCHEONS (3).

Align HANDLES (2) as shown. Lubricate O-RING (5) with water.

Push HANDLE (2) onto VALVE STEM (1). The HANDLE (2) is

installed properly when the top of the handle base is ﬂush with

top of ESCUTCHEON (3).

OFF

NOTE: Once the HANDLES (2) are installed they are difﬁcult to

remove from the VALVE STEM (1) to make any adjustments.

Make sure HANDLES (2) are properly aligned before they are

installed onto the VALVE STEMS (1). Only push HANDLES (2)

completely down into place when alignment is satisfactory.

1 2 3 4

Comentarios a estos manuales

Sin comentarios

American Standard 2506921.002 Guía de instalación Pagina 2

Comentarios a estos manuales

Relacionado con productos y manuales para Artículos Sanitarios American Standard 2506921.002